Novation TWITCH User Manual Download

Page: 62 / 71

English

the Setup Screen

The

SETUP screen allows you to alter system settings and to customize various aspects of

ITCH. You can toggle between ITCH’s main screen and the SETUP screen at any time by

clicking the SETUP button

Software Version

The version and build number of ITCH are displayed in the lower left hand corner.

Clicking the

CHECk FOR UPDATES button launches the computer’s default web browser to

access the ITCH update page of the Serato website. This lets you check whether an updated

version of ITCH is available.

notE: The computer must have an Internet connection for this feature to work.

The computer’s real-time clock is displayed at the screen top left, and the small horizontal

bargraph indicates percentage CPU usage.

SEtuP main area:

The main area of the SETUP screen has five tabs: HARDWARE, PLAYBACk, LIBRARY,

DISPLAY

and

MIXER

Summary of Contents for TWITCH








































































Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands

Novation TWITCH, User Manual

Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands