Novation TWITCH User Manual Download

Page: 43 / 71

English

Sync Behaviour without Beat Grids

This behaviour applies if you have the Enable Beat Grids option turned off in the SETUP page,

or if the track loaded to the deck does not have a Beat Grid assigned.

Press SYNC on a deck to synchronise the tempo (BPM) of the currently loaded track to that of

the track on the other deck. ITCH will also attempt to snap the closest transients of the tracks

together.

The SYNC button on TWITCH will light. Adjusting the pitch on either deck now adjusts the

tempo of both decks.

If the tracks fall out of sync, press SYNC again to re-sync the tracks.

To take a deck out of sync, press SHIFT + SYNC. The SYNC button on TWITCH is no longer lit.

When a deck is taken out of sync, it will revert to its original BPM.

auto tempo Behaviour

This applies to all tracks, regardless of whether they have a Beat Grid, or if Beat Grids are

enabled.

Press SHIFT + SYNC to synchronise the tempo (BPM) of the currently loaded track to that of

the track on the other deck. This will not synchronise the Beat Grids or transients, it will only

synchronise the tempo.

The Master Clock now displays the tempo the two decks are playing at. If a deck has auto

tempo engaged, its number in the master clock is yellow - also the SYNC button on TWITCH

will light. Adjusting the pitch on either deck now adjusts the tempo of the master clock, which

adjusts both decks.

To take a deck out of auto tempo, press SHIFT + SYNC. The deck’s number in the master clock

is no longer yellow and the SYNC button on TWITCH is no longer lit. When a deck is taken out

of auto tempo, it will revert to its original BPM.

Master clock

ITCH uses a Master Clock to synchronise tracks together. The Master Clock is displayed

in the virtual deck area

, replacing the Tempo-Matching display. It indicates which decks

are currently synchronised to the master tempo value. The Tempo-Matching display may be

restored by clicking on the area.

Summary of Contents for TWITCH








































































Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands

Novation TWITCH, User Manual

Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands