Click the small ‘+’ icon in the Cubase ‘Studio Setup’ window and select ‘Mackie HUI’. Now, in the ‘Mackie HUI’ tab, set
the input and output port to ‘Novation SL MkIII SL MkIII InControl’ as shown below:
Note: The ‘Novation SL MkIII SL MkIII’ port may show as ‘MIDIIN(put)’/’MIDIOUT2’ or something similar on Windows.
• Reaper
Please note that Reaper version 5.941 or newer is required to work with the SL MkIII.
To set up the SL MkIII as a HUI control surface in Reaper, navigate to ‘Options’ > ‘Preferences…’ > ‘MIDI Devices’. Be
sure to set your ports as shown below, the ‘Focusrite A.E. – Novation SL MkIII – SL MkIII InControl’ port MUST NOT
say ‘!! N/A...’. If this is the case the user might solve this by right-clicking the device and choosing ‘Forget device’:
Navigate to the ‘Control/OSC/web’ tab in the ‘Reaper Preferences’ window and click ‘Add’ to add a new control surface.
Now, in the ‘Control Surface Settings’ window, set the Control surface mode to HUI (partial) and set the input and out-
put port to ‘Focusrite A.E. – Novation SL MkIII – SL MkIII InControl’ as shown below:
iv.
Pro Tools
To set up the SL MkIII in Pro Tools, navigate to ‘Setup’ > ‘Peripherals...’ > ‘MIDI Controllers’. Ensure your ports are set
up as below. Set Type to ‘HUI’ and Re-ceive From and Send To to the ‘Novation SL MkIII, SL MkIII InControl’ port.
Summary of Contents for SL MkIII
Page 1: ......
