16
ADVAnCED MoDE
Advanced Mode is primarily used to control external MIDI hardware, however it can also be used to control software
when Automap is not supported or suitable for that software.
To switch to Advanced mode, press the Automap button so the LED is off.
Advanced mode includes 32 pre-built templates for controlling both hardware units and some software. All templates
have been laid out intuitively with all controls labelled, but for full information on advanced mode templates, please check
the Novation Answerbase: www.novationmusic.com/answerbase
SELECtInG tEMPLAtES
To switch between the 32 Advanced mode templates, press the
speed dial
knob.
Once pressed, the first 16 of the 32 templates will be displayed on the LCD.
The flashing name on the LCD indicates the currently loaded template.
Press the button or knob on the top row to select the corresponding template from the top row on the LCD.
Press the button or knob on the bottom row to select the corresponding template from the bottom row on the LCD.
Press the
P1
up/down buttons to list the other 16 templates.
