manualshive.com logo in svg

Novation A-Station, User Manual

Share
Download
Novation A-Station User Manual Download Page 52

For more information on setting up and triggering from an exter-
nal audio input signal, see page 52.

LFO Delay Triggering 

When the Voice mode is set to any of the Mono options, differ-
ent LFO delay settings are available for legato playing styles

(notes overlapping). When the first note of a musical phrase is
played it might be desirable to have an initial delay on LFO 1.
(If LFO is routed to pitch modulation, a vibrato effect would be
introduced after the delay time). For the remaining legato notes,
a non interrupted  vibrato might be required.

Changing the LFO Delay Triggering (Mono mode only)

Repeatedly press KEY 0 (ensure function switch is in shift
mode) until the display shows 

L d 

and an alternating value. The

table opposite illustrates the options according to the letters dis-
played. Use the PORTA/DATA knob to change the mode.

LFO1 and LFO2 Locking and Key Sync

Both LFO 1 and LFO 2 may be locked or synchronized to Key
presses.

Locking the LFOs

Each of the eight voices have two LFO’s - sixteen in total. The
eight LFOs designated LFO 1 (one per voice) may be ‘phase’
locked together and similarly the eight LFO’s designated LFO 2
may be locked.

To illustrate this, assume the LFO waveform is a triangle wave
and at a specific moment in time all eight are at the beginning
of a the rising portion of the wave. At a later point in time all will
be at the beginning of the falling portion of the wave. If this
waveform is applied to pitch, when a number of notes are
played simultaneously, the pitch of all the notes will rise and fall
at precisely the same time. 

If the LFO is not locked, then each wave will be at a random
position relative to the others. In this pitch modulation example,
the pitch of all the notes will be changing ‘out of synchroniza-
tion’ with others. 

LFO's Delay Trig Type Description

n L

None

1 L

LFO 1 only

2 L

LFO 2 Only

b L

Both LFO's

50

Advanced features

Velocity - Triggering - Synchronisation

External Audio Trig

Description

o F

Triggering Disabled

t  r

Triggering Enabled

F d

Ext Audio fed Direct to Effects

Summary of Contents for A-Station


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands