manualshive.com logo in svg

Novation A-Station, User Manual

Share
Download
Novation A-Station User Manual Download Page 46

Advanced features

The A-Station will respond to Pitch and Modulation wheel infor-
mation from a MIDI keyboard. The response is set using the
Wheels Menu - KEY 8.

Setting up a Pitch change when pushing a wheel forward

Press KEY 8 (ensure the function switch is in SHIFT mode) and
the display will show  

b 1 

alternating with a numeric value

.  

The

value indicates how many semi-tones the pitch will change for
Oscillator 1 when moving the pitch wheel.

Adjust the PORTA/DATA knob until the desired number of semi-
tones is displayed. This affects the current program being lis-
tened to. Display values 1-12 will result in a higher pitch when
the wheel is pushed forward. Display values -1 - .12 will result
in a lower pitch.

Subsequent key presses of Key 8 will scroll through
the Wheels menu as described in the table opposite.

NOTE: If the current program uses more than one
Oscillator, it is recommended that the bend amount is
set equal for each Oscillator. If chord type effects are
required when moving the pitch wheel, different pitch
bend amounts may be set for each Oscillator. 

Changing the Absolute Pitch using the
Modulation Wheel

During performance it may be desirable to drastically 
change the pitch of all the Oscillators using the
Modulation Wheel. Repeatedly press KEY 8 (ensure

the function switch is in SHIFT mode) until the display shows 

P

A 

alternating with a numeric value

.  

Adjust the PORTA/DATA

knob. A value from  -1 to 64. will result in a lower pitch being
generated when the mod wheel is pushed forward. A value
from 01 to 63  will result in a higher pitch being generated when
the mod wheel is pushed forward.

Setting up Vibrato using the Modulation Wheel

During a performance it is often desirable to introduce a Vibrato
effect by pushing the Modulation Wheel forwards or backwards.

A Vibrato effect is simulated by adding a small amount of pitch
modulation to the Oscillators. The A-Station allows modulation
from LFO 1 to alter the pitch of the Oscillators. Repeatedly
press KEY 8 (ensure the function switch is in SHIFT mode)

44

Pitch and Modulation wheels

         Key 8

Function                   Alternating LED Display

1st Press

Osc 1 Pitch Bend Amt

b 1

12. - 12

2nd

Osc 2 Pitch Bend Amt

b 2

12. - 12

3rd

Osc 3 Pitch Bend Amt

b 3

12. - 12

4th

Osc 1,2,3 Absolute Pitch Amt

P A

64. - 63

5th

Osc 1,2,3 Pitch Mod (LFO1) Amt

P L

64. - 63

6th

Filter Cut Off Absolute Freq Amt

F A

64. - 63

7th

Filter Cut Off Freq Mod (LFO2) Amt

F L

64. - 63

8th Amplifier 

Level

A L

64. - 63

9th

                                   Wheels Menu                                

Responding to Pitch and Modulation Wheel Data

Summary of Contents for A-Station


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands