manualshive.com logo in svg

Novatel MT 3060 R, Command Reference Manual, Page: 163 / 330

Share
Download
Novatel MT 3060 R Command Reference Manual Download Page 163

- 151 -

AT$RTCTIME

Real Time Clock Time

<rtc_day>

The day to which the time is being set.  Values range from 1-31.

<rtc_hour>

The hour to which the time is being set.  Values range from 0-24 for 24-Hour
mode settings.

NOTE: only 24-Hour mode currently supported.

<rtc_min>

The minute to which the time is being set.  Values range from 0-59.

<rtc_sec>

The second to which the time is being set.  Values range from 0-59.

Notes

This command is used to set the time for the RTC.  Currently all time is based on
24-Hour time format.

Examples

at$rtctime?

$RTCTIME: 01, 03, 10, 13, 14, 03, 2

OK

at$rtctime=?

$RTCTIME: (0..6), (0..99), (1..12), (1..31), (0..23), (0..59), (0..59)

at$rtctime=1,3,10,13,14,37,50

OK

Summary of Contents for MT 3060 R











































































































































































































































































































































Reviews:

No comments