Novatel MiFi 7000 User Manual Download Page 72

Page: 72 / 88

How do I reset the Access Point and Router settings back to factory settings?

To reset the access point and router settings, follow these steps.

➊

Connect to the MiFi Admin Website (

http://my.MiFi

http://192.168.1.1

) and go to

MiFi

Settings > MiFi > Backup and Restore

➋

The Backup and Restore page has a

Restore to Factory Defaults

button. This button resets all

Access Point and Router settings to their factory default values. All existing settings are lost.
(See Backup and Restore on page 71).

No service is available.

•

Reorient your device. If you are inside a building or near a structure that may be blocking the
signal, change the position or location of the device. For example, try moving your device
close to a window.

•

You are outside your coverage area, or there may be a problem with your account. Check
with your network operator.

The MiFi has no power or the device screen does not display when the
power button is pressed.

•

Make sure the battery is properly seated in the device.

•

Make sure the battery is fully charged. Plug in the AC charger for at least 3 hours.

I forgot my Wi-Fi Password.

•

Tap

Wi-Fi Name/Password

to display your Wi-Fi Name (SSID) and Wi-Fi Password.

I forgot my MiFi Admin website Password.

•

Select

Help > MiFi Admin website

to display the MiFi Admin website URL and Admin

Password.

Summary of Contents for MiFi 7000

























































































Search results

Summary of Contents for MiFi 7000

Reviews:

Related manuals for MiFi 7000

Brands by name

Popular brands

Novatel MiFi 7000, User Manual

Search results

Summary of Contents for MiFi 7000

Reviews:

Related manuals for MiFi 7000

Brands by name

Popular brands