16
Remove the Tab and Charge the Battery
IMPORTANT
Before you use your device, be sure to charge the battery for at least four hours
to ensure a full initial charge.
The MiFi 4510L device requires an activated account with a network operator.
To insert and charge the battery
➊
➊
Press the button and then slide the cover to open the battery compartment, located on the
bottom of the device.
[IMAGE FORTHCOMING]
➊
➋
A plastic tab separates the gold-colored contact points in the battery compartment. Pull to
remove the plastic tab.
[IMAGE FORTHCOMING]
➊
➌
Once the tab is removed, replace the cover to close the battery compartment.
[IMAGE FORTHCOMING]
➊
➍
Connect the microUSB end of the AC wall charger to the microUSB port of the device as
shown.
[IMAGE FORTHCOMING]
➊
➎
Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge for at
least four hours.
CAUTION!
Use only batteries and chargers with your device that have been approved by
Novatel Wireless. The failure to use approved batteries and chargers may increase the risk that
your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or
property damage.
You are now ready to connect your computer or other wireless device to the MiFi 4510L device. You
can also optionally connect the MiFi 4510 device to your computer to install the drivers.
DRAFT
