57
My MiFi just powered off without my pressing the power button. Why?
This may occur under any of the following circumstances.
» Pressing the Master Reset button.
» Restarting the device.
» Switching profiles.
» Restoring the configuration settings.
» Battery depleted.
➊
➤
Manually press the power button to turn it back on.
➊
➤
If the battery is depleted, charge the device with the wall charger or USB cable.
How do I reset MiFi back to factory settings?
The master reset button is in a small hole located on the bottom of the device, under the battery
cover. This button returns the device to factory settings, including re-setting the network name
(SSID) and network key (Wi-Fi passkey) to those printed on the sticker affixed to the back of the
device.
1. Place one end of an unfolded paper clip in the master reset button hole.
2. Press the paper clip on the button until the LED blinks green one full blink and then a very
brief blink (about five seconds).
How do I reset the Access Point and Router settings back to factory settings?
When MiFi is in Wi-Fi mode, you can connect to MiFi Settings by connecting your computer to the
MiFi wireless network and going to http://192.168.1.1 in your browser.
Connect to the Diagnostics screen. See
Diagnostics
on page 48. The Diagnostics screen has a Reset to
Factory Defaults button. This button resets all Access Point and Router settings to their factory default
values. All existing settings are lost.
DRAFT
