Configuring the Modem
11
Manual Revision
2
When the Modem Manager application is initially launched, the
Setup
dialog box will open,
shown in Figure 14.
Figure 14 Setup dialog box
You must create a connection profile before you can connect to the Internet. If you choose to
create the connection profile now (click
Create Connection Now
), the Add Connection Wizard
will launch in order to guide you through this procedure. If you choose to delay creating a
connection profile, you must access the Add Connection Wizard through the
Connection
Manager
window. The Add Connection Wizard allows you to create either a GSM or GPRS
network connection profile. Your service provider will indicate which network type to use when
creating the connection profile.
If your service provider uses a GPRS network type, see the section below. If your service provider
uses a GSM network type, see
Creating a GSM Connection Profile
on
page 14
.
Creating a GPRS Connection Profile
To create a GPRS connection profile:
1.
Select
Connection Manager
from the
Tools
menu. The
Connection Manager
window will
be displayed, shown in Figure 15.
Figure 15 Connection Manager window
Note:
If you chose
Create Connection Now
from the
Setup
window, shown in Figure 14, the Add
Connection Wizard will automatically launch (you will not see the
Connection Manager
win-
dow).