MMMM
eeeerrrr
lllliiii
nnnn
ffffoooo
rrrr
GGGGPPPP
RRRRSSSS
Configuring the
Modem
Your Merlin for GPRS G201 PC Card modem may have come preconfigured with
one or more connection profiles. A connection profile contains the necessary
information to identify your modem to your service provider and access your
GPRS or GSM account.
Depending on the configuration of your software and your service provider, you
will be required to complete one of the configuration paths listed below. The
appropriate configuration process will be launched automatically. You will not
need to choose the configuration path.
The configuration paths are:
•
Single pre-defined connection profile,
•
Multiple pre-defined connection profile, and
•
User defined connection profile.
Single Pre-defined Connection Profile
If your service provider has configured their network so that all clients will use a
single point of access, a network connection profile will have been previously
installed. In this instance, once you install the Modem Manager software and
reboot your computer, no other configuration is necessary. When the Modem
Manager is launched, it will use the pre-defined connection profile to connect to
the network when directed (provided you have a GSM or GPRS account with the
designated service provider).
Note:
The modem must be inserted in the PC Card slot during the configuration
process. See
Inserting the Modem Into Your Computer
on
page 4
for
more information.