~ 12 ~
REV-225
NOVATEK-ELECTRO
and the
symbol “
” (manual control) will appear on the display. To return to automatic operation, you should press
and
buttons again.
During the operation of the device, when the time of the night break comes (the setting is described in it. 3.2.7),
the load of the device is disconnected until the time of the night break is switched off.
If the user has set the period of the days off (the setting is described in it. 3.2.6.), then when the days off period
comes, the device will go to the blocked state (the symbol “
” appears on the display), the program will stop and
the device will be disconnected.
At the end of the days off period, the device will return to normal state and the main program will start.
5 MAINTENANCE
5.1 Safety precautions
THE TERMINALS AND THE PRODUCT INTERNAL ELEMENTS CONTAINS POTENTIALLY LETHAL VOLTAGE.
DURING MAINTENANCE IT IS NECESSARY TO DISABLE THE REV-225 AND CONNECTED DEVICES FROM
THE MAINS
5.2 Maintenance of the device must be performed by qualified service personnel.
5.3 Recommended frequency of maintenance
is every six months.
5.4 Maintenance procedure:
1) Check the connection reliability of the wires, if necessary, clamp with the force specified in Table 1;
2) Visually check the integrity of the housing, in case of detection of cracks and damages to remove the device
from service and send for repair;
3) If necessary, wipe with cloth the front panel and the product housing.
Do not use abrasives and solvents for cleaning.
6 SERVICE LIFE AND MANUFACTURER'S GUARANTEE
6.1 The service life of REV-225 is 10 years. After the end of this period, please, contact the manufacturer.
6.2 The storing period is 3 years.
6.3 Warranty period of the unit operation is 5 years from the date of sale.
During the warranty period the Manufacturer is responsible for free repair of the unit, if the Consumer has
complied with the requirements of this Operating Manual.
ATTENTION! IF THE UNIT HAS BEEN OPERATED WITH VIOLATION OF THE REQUIREMENTS OF THIS
OPERATING MANUAL, THE MANUFACTURER HAS THE RIGHT TO REFUSE WARRANTY SERVICE.
6.4 Warranty service is performed at the place of purchase or by the Manufacturer of the product.
6.5 Post-warranty service is performed by the Manufacturer at current rates.
6.6 Before sending for repair, the unit should be packed in the original or other packaging excluding mechanical
damage.
7 SHIPPING AND STORING
REV-225 should be kept in the original packing in indoors premises with temperature from -45 up to +60
C and
relative humidity not more than 80 % with absence of vapors in the air which are harmful for packing and details of the
device.
