Novatek-electro REV-225, Operating Manual

Page: 7 / 12

~ 7 ~
NOVATEK-ELECTRO
REV-225
1) Select menu
«ASTRO» and press ОК
button;
2) Select menu
«TIMES» and press ОК
button, displaying the sunrise time;
3) Press
ОК
button and displaying the sunset time;
4) Exit from the setting by pressing MENU button
.
Figure 6 - Astronomical time setting diagram
Note: The sunrise and sunset times are calculated automatically based on the entered coordinates (Setting of the
geographical location position “ “)
Offset time setting
« »
The user sets the offset time relative to the time of sunrise and sunset.
Every day REV-225 calculates the real time of sunrise and sunset according to the geographic location settings,
sums this time with the offset time, then the obtained time is compared with the current time and if the time obtained
is more than or equal to the current time, the REV-225 will switch the load on or off.
Fig. 7 shows the diagram of the time offset setting.
Figure 7
– Time offset setting diagram
For setting time offset:
–
Select menu
«ASTRO» and press ОК
button;
–
Select menu
«OFFSET» and press ОК
button;
–
Select the offset time of sunrise with buttons / and press
ОК
button. Offset range is
±2h.
–
Select the offset time of sunset with / and press
ОК
button. Offset range is
±2h.
–
Exit from the setting by pressing MENU .
Notes:
–
Long press button more then 0.5s, increase the numerical value quickly;
–
Long press button more then 0.5s, decrease the numerical value quickly;
Setting of the geographic location
« »
The user specifies the coordinates of REV-225 location (it is used to calculate the time of sunrise and sunset):
latitude, longitude and time zone.
Fig. 8 shows the diagram of the geographic location setting.
For setting of latitude necessary :
–
Select menu
«ASTRO» and press ОК
button;
–
Select menu
«POSITION» and press ОК
button;
–
Select menu
«LATITUDE»
and press
ОК
button
;
–
Select menu
«SOUTH»
ore
«NORTH»
and press
ОК
button.
«SOUTH»
- south latitude,
«NORTH»
north latitude;
–
Set latitude degree value with / buttons and press
ОК
button;
–
Set latitude minute value with / buttons and press
ОК
button;
–
Exit from the menu
«LATITUDE»
setting by pressing MENU button.
For setting of longitude necessary :
–
Select parameter menu «LONGITUD»
and press
ОК
button;
–
Select parameter menu
«EAST»
ore
«WEST»
and press
ОК
button.
«EAST» -
east longitude,
«WEST» -
west longitude;
–
Set longitude degree value with / buttons and press
ОК
button;