-
2
-
This present manual contains necessary information about application, main operation principles and
adjustment setting for the two-channel electronic time delay relay REV-201M (hereinafter
REV-201М
).
1 GENERAL DESCRIPTION AND OPERATION
1.1 APPLICATION
REV-201M is designed for the commutation of electrical circuits of 240V 50Hz AC as well as 24 – 100V DC
electrical circuits with the adjustable time delay setting.
REV-201M contains 2 channels – each of them may work in 4 user preset algorithms:
-
Turn ON
time delay relay;
-
Impulse relay;
-
Cyclic relay for the periodic events;
-
Operation relay *.
_________
* REV-201M could be used as the relay of pre-starting signalization for the machinery that require to
announce that some mechanism or machinery will soon take a start to make people aware of this and get
away from the risky zones. Widely used for steel plants, heavy machinery, cranes and construction
mechanisms as well as mining companies for the technological stuff safety.
Time delay setting for each channel starts from the moment of the power supply given to the
corresponding channel. REV-201M allows to provide 2 modes of operation:
Mode 1. Independent operation of channels.
To each of two channels power supply is given
independently and thus each channel starts the countdown from the moment the power supply is given. This is
the mode when 2 independent time relays are functioning in one compact case housing (2 time delay relays in
one case).
Mode 2. Parallel operation of the channels.
To each of two channels the power supply is applied
simultaneously. Thus the time countdown on each channel starts at the same time and comes one and the
same input power supply. Triggering time corresponds to the user-adjusted settings for each of the channels.
So the REV-201M in this mode operates like one time delay relay with 2 output contacts that have the same or
different time settings.
ATTENTION!!! When using the REV-201M in Mode 1. The power supply of both channels must
necessarily have common neutral.
1.2 TECHNICAL PARAMETERS
1.2.1
Basic technical characteristics are shown below in Table 1.
Table 1
Rated AC input power supply (terminals L, N), V
160 – 300
Rated DC input power supply (terminals +24, N), V
24 10%
Rated power circuit frequency, Hz
50 – 60
Initialization readiness time after the power supply application to the channel,
sec, less then
0,25
Timing accuracy, %, not less then
1,5
Time setting accuracy (scale accuracy), %, not less then
3
Number of operation algorithms
4
User -adjustable time range, sec
0 – 36000
Time setting adjustment
Smooth
Number of scale marks for the potentiometer knobs
10
Type and quantity of the output commutation terminals
1 changeover
Protection degree: - housing
- contact terminals
ІР40
ІР20
Commutation lifetime of the output terminals at cos=1:
- under the load of 7А, times, not less then
- under the load of 1А, times, not less then
100 000
1 000 000
Rated power consumption (under the load), VA, not more then
1,0
Weight, kg, not more then
0,150
Outer dimensions, mm
35 х 92 х 58
Operation temperature range, °С
From - 20 to +55
Storage temperature, °С
From - 45 to +70
REV-201М
NOVATEK- ELECTRO
