background image

8

 -

3.2  It is recommended to perform technical maintenance every 6 months of use. Look at the case of 

REV-201M and make sure that there are no dents or any other mechanical damages. Make sure that all the 
wires are tightened well and properly connected and pay attention to the absence of burned contacts.

4  PRODUCT LIFETIME WARRANTY AND STORAGE CONDITIONS

Manufacturer assures 10 years operation lifetime for the REV-201M.

 

On the expiration of this time kindly 

contact to the manufacturer.

Manufacturer guarantees safe operation of the device within 36 calendar months from the sales date on 

the following conditions:

-

Proper device connection according to the points stated in this present manual;

-

The QA department seal should not be damaged or affected;

-

Integrity of the case, absence dents, mechanical defects and absence of the signs to open the 

product case.

5  TRANSPORTATION

Transportation of the product could be made with the use of any transport in accordance with standard 

rules and safety requirements for the chosen transportation method. When transporting or handling product 
should be prevented from beats, drops and the action of increased humidity.

REV-201М

     

                                                                                                                                                       

NOVATEK- ELECTRO

Summary of Contents for REV-201M










Reviews: