MCTRL660 PRO Independent Controller User Manual
www.novastar.tech
3
Custom resolutions supported
Max width: 3840 pixels (3840×600@60Hz)
Max height: 3840 pixels (800×3840@30Hz)
HDCP 1.4 compliant
Supported standard resolutions:
1024×768@(24/30/48/50/60/72/75/85/100/120)Hz
1280×1024@(24/30/48/50/60/72/75/85)Hz
1366×768@(24/30/48/50/60/72/75/85/100)Hz
1440×900@(24/30/48/50/60/72/75/85)Hz
1600×1200@(24/30/48/50/60)Hz
1920×1080@(24/30/48/50/60)Hz
1920×1200@(24/30/48/50/60)Hz
2560×960@(24/30/48/50)Hz
2560×1600@(24/30)Hz
Do NOT support interlaced signal input.
3G-SDI IN
SMPTE ST 425-1 Level A & B, SMPTE ST 274, ST 296, ST
295 compliant
Max input resolution: 1920×1080@60Hz
Note: Do NOT support input resolution and bit depth settings.
Output
RJ45×6
6x RJ45 Gigabit Ethernet ports
Max loading capacity per port:
−
8bit: 650,000 pixels
−
10/12bit: 325,000 pixels
Support redundancy between Ethernet ports.
OPT1
OPT2
2x 10G optical ports
−
Single-mode twin-core fiber: Support LC optical
connectors; wavelength: 1310 nm; transmission distance:
10 km; OS1/OS2 recommended
−
Dual-mode twin-core fiber: Support LC optical
connectors; wavelength: 850 nm; transmission distance:
300 m; OM3/OM4 recommended
The maximum loading capacity of a single optical port equals
to that of 6 Gigabit Ethernet ports.
2x OPT inputs/outputs
OPT1 is the main input or output port and corresponds to the
6 Gigabit Ethernet ports
OPT2 is the backup input or output port of OPT1.
In sending card mode, either the 2 optical ports or the 6
Gigabit Ethernet ports can work as output ports to output the
same image.
In fiber converter mode, when the optical ports work as input
ports, the 6 Gigabit Ethernet ports work as output ports. When
the 6 Gigabit Ethernet ports work as input ports, the optical
ports work as output ports.
DVI LOOP
DVI loop through
HDMI LOOP
HDMI loop through. Support HDCP 1.3 loop through encryption.
3G-SDI LOOP
SDI loop through
Control
ETHERNET
Connect to the control computer.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
