NOVARDEN NRL630, User Manual

Page: 19 / 160

17
Troubleshooting
EN
The robot mower
cannot detect its
charging station.
1. The charging station
is not on a flat
surface.
2. The charging station
is not powered
correctly.
1. Reboot the charging
station on a flat surface.
2. Check the charging
station is plugged in.
The robot mower
does not reach the
charging pins
1. There is a difference
in level between the
entrance and back of
the charging station.
2. The perimeter cable
is not correctly
installed under the
charging station.
1. Make sure the charging
station is not too
high off the ground.
If necessary, level the
ground with soil.
2. Check and readjust
the perimeter cable
installation under the
charging station.
The robot mower
behaves abnormally
around flower beds The perimeter cable is not
installed correctly
Check the perimeter cable
is installed correctly and the
“Out” wire does not cross
the “In” wire.
The robot mower
goes outside the
perimeter cable.
The wire is not connected
correctly or has been cut.
Check the perimeter cable’s
condition and that it is
connected correctly.