JADAK JE-238
User’s Manual
Page 35
Decode Window Left/Right
The Left and Right boundaries for the decode window can be set either by sending the
serial command shown under the barcodes below with a value between 0 and 639, or by
scanning one of the barcodes below and then set the boundary pixel value by scanning
the digit codes and the SAVE barcode in
Please contact JADAK if assistance is needed.
Default Left boundary =
WINDECL 256
. Default Right boundary =
WINDECR 384
.
Decode Window Defaults
Set all Decode Window settings to their default configuration and values.
This is a screenshot of an example where a Decode Window with T=160, B=270, L=20, R=130
was used to speed up decoding a Data Matrix code that was offset to the left in the Field of View.
Summary of Contents for JADAK JE-238
Page 1: ...JE 238 User s Manual...
