JADAK JE-238
User’s Manual
Page 19
Chapter 3 - Input/Output Settings
Good Read Indicators
LED – LED on Good Read
The LED indicator can be enabled or disabled
in response to a good read. Default = Enabled.
*
Enable
Disable
Beeper - Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off
only turns off the beeper’s response to a good read indication. All error and menu beeps are still
audible.
Note:
the JE-238 requires an interface board with a beeper for this. Default = Enabled.
* Enable
Disable
Beeper Volume - Good Read
The beeper volume codes modify the volume of the beep that the JE-238 emits on a good read.
When set to off, error and menu beeps are still audible. Default = High.
Off
Low
Medium
*
High
Summary of Contents for JADAK JE-238
Page 1: ...JE 238 User s Manual...
