Novanta JADAK JE-238, User Manual

Page: 69 / 80

JADAK JE-238 User’s Manual Page 68
Appendix A1-2 Command List and Standard Default Parameters
Command Range (if applicable) Default Value Description
232BAUD
300-115200 115200 RS-232 Baud Rate
232DEFA
Default RS-232 Parameters
232WORD
N 8 1
Set communication settings (e.g. “N 8 1”)
128DEFA
Default Code 128 Parameters
128ENAB
0 to 1 1 Enable Decoding Code 128
128MAXL
0 to 55 55 Max Code 128 Symbol Length
128MINL
0 to 55 0 Min Code 128 Symbol Length
1D_POOR
0 to 1 0 Enable Poor Quality 1D Reading
AIM_DLY
0 to 4000 0 Aimer Delay (in milliseconds)
AIMMODE
0 to 3 3 Aimer Mode. 0 = off, 1 = alternate, 2 = cont.
ALLENAB
0 to 1 0 Enable all Symbologies
AZTDEFA
Default Aztec Parameters
AZTENAB
0 to 1 1 Enable Aztec Decoding
AZTMAXL
1 to 3832 3832 Max Aztec Symbol Length
AZTMINL
1 to 3832 1 Min Aztec Symbol Length
BEEPBEL
0 to 1 0 Enable Beep on [BEL]
BEEPPWR
0 to 1 0 Enable power up beep
BEPGDRD
0 to 1 1 Enable good read beeper
BEPLEVL
0 to 3 3 Beeper level (0=Off,1=Low, 2=Medium, 3=High)
BEPTIME
0 to 2 1 Beeper duration (0=short, 1=medium, 2=long)
BEPTONE
0 to 2 1 Beeper pitch (0=Low, 1=medium, 2=high)
C11CHEC
0 to 2 0 Enable Code 11 2-Character Check Digit
C11DEFA
Default Code 11 Parameters
C11ENAB
0 to 1 0 Enable Decoding Code 11
C11MAXL
1 to 55 55 Code 11 Max Symbol Length
C11MINL
1 to 55 4 Code 11 Min Symbol Length
C39ASCI
0 to 1 0 Enable Code 39 full ASCII Mode
C39CHEC
0 to 1 0 Enable Code 39 Check Digit
C39CONV
0 to 1 0 Convert C39 to C32 Pharmacode
C39DEFA
Default Code 39 Parameters
C39ENAB
0 to 1 1 Enable Code 39 Decoding
C39MAXL
0 to 48 48 Max Code 39 Symbol Length
C39MINL
0 to 48 0 Min Code 39 Symbol Length
C93DEFA
Default Code 93 Parameters
C93ENAB
0 to 1 1 Enable Decoding Code 93
C93MAXL
0 to 55 55 Max Code 93 Symbol Length
C93MINL
0 to 55 0 Min Code 93 Symbol Length