OnTime Clock
Installation and User Guide
Firmware Version 1
All claims based on information publicly available at time of printing. All other product or service names mentioned
in this document may be trademarks of the companies with which they are associated.
© 2015 Novanex, Inc. | All rights reserved | page 35
Condition
Solution
View or change the
Daylight Saving Time
(DST) setting
No Daylight Saving Time
- Type the command to disable DST:
dst
–
none,
then press the Enter key.
US and Canada -
Type:
dst -rule -1 8 2 2 1 1 10 2
Press the Enter key.
European -
Type:
dst -rule 1 -1 2 1 1 -1 9 1
Press the Enter key
.
Other Locations
–
The
support site
contains a DST calculator
which can compute the correct DST configurations string for your
location. Obtain the correct string and enter it with the
dst
–
rule
command.
View or change the Time
Zone
timezone
-
To view the clock’s current time zone setting.
timezone
–
N or timezone N
-
To change the clock’s time zone
setting, (don’t use a + sign for positive values) where N
= the
desired time zone offset in the range -11 to 12.
For example, to set the time zone for (UTC -5) Eastern Time (US &
Canada), you would use:
timezone -5
Note:
If you’re not sure what time zone offset to use, check the
time zone value used on a Windows PC on your network; double-
click on the time in the Windows service tray (in the lower-right
corner of your screen) and choose the Time Zone tab.
Configure the 12/24 Time
Format
Note:
These commands are
ignored by the analog
clock.
display
–
t 24
- Sets 24 hour display.
Note:
the space before and
after the
–
t
display
–
t 12
-
Sets 12 hour display.
Note:
the space before and
after the
–
t
Configure the AM/PM
Indicator
Note:
These commands are
ignored by the analog
clock.
display
–
p off
Turns off pm indicator.
Note
: the space before and
after the
–
p
display
–
p on
Turns on pm indicator.
Note
: the space before and
after the
–
p
Configure Colons On/Off
Note:
These commands are
ignored by the analog
clock.
display
–
c off
Turns off colons.
Note
: the space before and after
the
–
c
display
–
c on
Turns on colons.
Note
: the space before and after the
–
c
