4
SHORT INSTRUCTIONS
PLAYING A GAME
1.
Make sure the unit is turned OFF. Plug in the LCD BOX. Then connect the adaptor with the
chess computer before you plug it into the mains. Set up the chess pieces in the opening
position. White pieces on rank 1 and 2, Black pieces on rank 7 and 8.
2.
The power switch is a 2-position switch and is located on the right side of the board. It is
marked ON/OFF. Please push it to the ON position.
3.
The computer will automatically recognize a new game as soon as the chess pieces are set up
in the opening position (see above) and 3 beeps will sound. Please note that the chess pieces
have to be placed in the middle of the square. If not, the square LEDs will light up until you
have placed the piece in the middle of the square.
4.
You may now enter your first move as White. The LEDs on the “from” square and the LEDs
on the “to” square will light up as soon as they are touched by the piece. At the same time
your move will be shown on the LCD display. Once completed the unit will start computing
its counter move.
5.
The computer’s counter move will be shown in the plugged-in LCD BOX and will also be
indicated by the LEDs on the respective squares. Please make the move for the computer
according to the indicated LED lights/ LCD display.
USING THE MENU SYSTEM
This Novag chess computer uses a menu system, which is controlled via squares A8 – H8 and A7
on the chessboard. Using the menu system is relatively simple. Here are some general
guidelines:
1. Push the Menu button on the right hand side of your unit. This will start the Menu mode of the
chess computer. The LCD will continuously display each available function in a rotating
fashion. At the same time the corresponding square on the chessboard will light up.
2. The magnet sensor chessboard works as follows: each chess piece and each square has a
magnet embedded. Once the magnet inside a chess piece and the magnet on the square will
come into contact, the chess computer will record it. Each time you lift a chess piece off the
board the unit will note this as well because the magnets lost contact and so on.
3. You may enter a function at any time by placing the function access piece on the respective
square. If a chess piece is already placed on this square, simply lift it up and put it back.
Following functions are available:
Square A8 = LEVEL SETTING
Square B8 = RANDOM
Square C8 = EASY
Square D8 = SOUND
Square E8 = REFEREE
Square F8 = AUTOPLAY
Square G8 = GAME REVIEW
Square H8 = FLIP BOARD / CHANGE COLOUR
Square A7 = SET UP
4. If you have chosen the “wrong” function, please press the menu button on the side of the unit
to exit this mode and re-press it to enter the menu mode once again.
5. To change the settings of a chosen function, re-tap the same square as many times as necessary
until the desired setting is displayed on the LCD screen (see individual chapters for details).
6. To exit and save the chosen setting, push the Menu button on the right hand side of the unit.
This action will exit the menu and you can start/ resume your game. Please make sure to
remove any additional piece you have placed on the chessboard before you resume your game.
Summary of Contents for Citrine
Page 1: ...NOVAG citrine INSTRUCTION...
