Flip the trailer and
support it on sturdy
stands so that you can
finish the assembly.
Remove the 3 self
tapping screws installed
in the tongue. Insert the
jack through the tongue
using caution not to
damage the wiring
harness.
Tighten the 3 self tapping
screws into the pre
drilled holes in the
tongue. Tighten to 10 lbf.
Install both fenders by
bolting through the
fender brackets and into
the preplaced nuts in the
frame. Use the 5/16-18 x
¾ bolts from the
hardware bag. Tighten all
4 bolts on each fender to
15 lbf.
Figure 16
Figure 17
Figure 18
7