Move the appliance using the integrated handle.
The remote control can be stored in the slot integrated into the appliance at the rear
cover if not used.
Switching On
Press the on/off power switch [F] to turn the appliance on. The product is now in
standby awaiting a mode to be selected via the buttons on the appliance or the
remote control.
The appliance emits a beep sound.
The light on ( ) will turn on.
The following settings can be performed using the touch pad or the remote control.
A beep sound is emitted at every key press.
Press the stand-by button [f] to exit the stand-by mode and begin selection of the
different modes. Heater will start working under low power (
).
a.
Thermostat
button
b.
＋
: Temperature & hours increase
button
c.
Power
/
Mode button
d.
Timer button
e.
－
: Temperature & hours decrease
button
f.
Stand-by button
Remote controls
Battery (2025 - 3V)
