Timer: Auto Power on
This function should only be set if you require the heater to be automatically turned
on after a certain period (1 to 24 hours from the time the function is set). Only
change timer power setting under standby mode.
1.
Press the on/off power switch [F] to turn the appliance on. The light on( )
will turn on. The appliance will be in Stand-by mode.
2.
Press the Timer button(d), the light on( ) will turn on, and the start hour
digit (0.0) will blink.
3.
Use the “+” and “
-
” buttons [
b] and [e] to set the heater operation time
between 1 and 24 hours. 0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours
increase by 1 hour. This function will activate once the hour digit stops
blinking. The countdown digits will show on the display.
4.
The heater will automatically turn on when the time runs out.
5.
Remark: After the timer power on setting, make the power and ECO mode
settings. And under ECO mode, make the temperature settings. So that the
heater will turn on at the desired temperature or power setting.
6.
Note : When using timer modes, consideration should be given to the fact
that the heater may come on whilst unattended. Always follow the safety
instructions provided.
Timer : Auto power off
This function should only be set if you require the heater to be automatically shut off
after a certain period (1 to 24 hours from the time the function is set).
1.
When heater working, press the Timer button(d), the light on( ) will turn on,
and the start hour digit (0.0) will blink.
2.
Use the “+” and “
-
” buttons [
b] and [e] to set the heater operation time
between 1 and 24 hours. 0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours
increase by 1 hour. This function will activate once the hour digit stops
blinking. The countdown digits will show on the display.
3.
The heater will automatically shut off when the time runs out.
Off
Press the stand-by button [f] until sleep mode is selected and the control panel
screen goes off.
Press the on/off switch [F] to turn the appliance off completely.
To disconnect the appliance, remove the plug from the socket.
