Assembly Instructions
Turn the radiator upside-down on a scratch-free and stable surface to prevent
damage to the paint finish or your floor surfacing.
-Turn the radiator upside-down
-Pull out the wheelbases to both outmost sides, (see Fig 1).
Only operate the radiator in normal upright position with wheels assemblies
attached to the bottom.
Figure 1
Fig 1
Remote controls
The remote control requires one 2025 - 3V cell (supplied).
Follow the +/- polarity indicated on the remote control.
The remote control must be pointed towards the remote sensor on the control
panel.
If the remote control doesn’t operate as
expected, replace the cell.
Controls
A.Rear handle and Remote
control storage slot
B.Heater body
C.Wheel base
D.Front handle
E.Control panel
F.On/off power switch
G.Cable storage
H.Wheel
