HLS PS25 & HLS PS50 User Manual
MN-DT-1305I_B
4
1. POWER SUPPLIES HLS PS SERIES
INSTALLATION
The HLS PS Series is easy to install providing the
recommended procedures described in this manual are
followed.
Follow all installation instructions described in this
manual. Theses instructions must be understood
and followed to avoid damage to the S Series and
associated equipment.
1.1
Checking the HLS PS Series for
damage
Before attempting to install your power supply you should
do the following.
The procedure describe bellow tells you what to do in the
unlikely event that the supplied equipment has been
damaged after leaving the factory. However, if you have
problems regarding the quality of any supplied order
items, follow the procedure bellow:
1.
If, after removing the HLS PS Series, a visual
inspection reveals that it has been damaged, you MUST
NOT continue with the installation but contact you
supplier for advice on what to do next.
Similarly, if the product is found to be faulty during
installation, contact your supplier immediately.
2.
To aid your supplier, you are requested to note all the
details relevant to your complaint, clearly stating details of
any technical problems, date of receipt, packaging
condition, etc. and forward this to your supplier.
3.
Where the product needs to be returned to your
supplier, you are requested to use the original packaging
wherever possible
.
•
The building where the device is connected should
have surge and earth protections and these should be
easily accessible in order to disconnect the unit from
mains by its two poles.
WARNING
