Please read and save these instructions. Read through this owner’s manual carefully before
using product. Protect yourself and others by observing all safety information, warnings, and
cautions. Failure to comply with these instructions could result in personal injury and/or damage
to product or property. Please retain instructions for future reference.
1
Plasma 275
Operating Instructions and Parts Manual
Plasma Cutter
Description
The Plasma 275 is an IGBT inverter
plasma cutter with thermal overload
protection, a Trafimet torch and a built-in gas
regulator. This easy to use plasma cutter has
the power to cut up to 1/8 in. materials and a
pilot arc that makes cutting expanded metal
possible. This machine required single-phase
120V , 60 Hz input power.
Specifications and Dimensions
DESCRIPTION
SPECIFICATION
Power Supply
1ph-120V-60HZ
No-load Voltage
320V
Output Range
16A
Duty Cycle
50% @ 16A
Air Pressure
4.5 CFM@ 60 PSI
Power Switch
125VAC 20Amps
Dimension (L x W x H)
17.7”x6.7”x9”
Weight
21 lbs
Removing from carton
1.1 Remove cartons, bags or Styrofoam containing the welder and accessories.
1.2 Check the contents with the packing list below.
1.3 After unpacking unit, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing, or damaged parts. Shipping
damage claim must be filed with carrier.
ITEM
QTY.
Plasma Cutter
1 unit
Grounding Cable
1 pc
TRAFIMET Cutting Torch
1 pc
Electrode
3 pcs
Nozzle
3 pcs
Operator’s Manual
1set
″
