E
N
G
LI
S
H
7
Assembly of Base Support
1.
Attach Push Handle (E) from inside
Storage Compartment (C) using
supplied #6 Screws and #9 Nuts.
2.
Insert Cross Bar (K) into the square inserts on the
inside of Base Support (I) and secure from below
with two #1 Screws. Insert the Leg Assembly (L) over
the protruding ends of the Base Support (I) and
fasten from the inside of Base Support (I) using four
#3 Bolts, four #4 Flat Washers, and four #7 Nut Caps.
3.
Secure Bottom Plate (J) to Base Support (I) using four #1 Screws.
4.
Assemble Base Support (I) into the bottom of the Storage
Compartment (C) and secure with four #2 Screws.
