Page 2
ES2 Electronic Liquid Level Transmitter
EX-1845
KING-GAGE, A NOSHOK Company
The information contained in this manual was accurate at
the time of release. Specifications are subject to change
without notice.
Warranty
- All King Engineering products are guaranteed
to be free from defects in material and workmanship for
one year from the date of purchase. Any product or part
found to be defective under normal use within one year of
purchase will be repaired or replaced at no charge if returned
to the company at Ann Arbor, Michigan within ten days
of discovery of the defect. No other warranties, whether
expressed, implied, or statutory, including the warranties
of fitness for a particular purpose or merchantability, are
given by this agreement.
The exclusive remedy for nonconformity of these goods
shall be repair and/or replacement of the nonconforming
goods or parts.
Seller will not be liable for consequential damages resulting
from breach of this agreement. The term “consequential
damages” shall include but shall not be limited to damage
to all machines, equipment and goods other than the goods
sold hereby, interruption of production, loss of profits,
delays of any kind, administrative expense and overhead.
Revisions:
(A) March, 2008 – Original Release (applicable to ESR- serial no. versions)
(B) August, 2008 – Illustrations based on encapsulated board (ESR-serial no. versions)
(C) May, 2009 – molded cable w/ M12 plug connector
(D) August, 2009 – revised span adjustment ranges
(E) November, 2009 – ES2 Slimline version added
(F) August, 2011 – revised remote junction notes
(G) October, 2016 - model no.s (-3V) added for versions with FKM seal
