Norton TT 250 G, Operating Instructions Manual

Page: 8 / 20

8
2 Machine description
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity
with the safety regulations.
2.1 Short description
The TT250G Tile saw is designed for durability and high performance for onsite wet and dry cutting
operations of a wide range of tiles.
As with all other CLIPPER products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The machine is designed for wet and dry cutting of a large range of tiles. It is not designed for
cutting wood or metals.
2.3 Layout
Frame (1)
The frame is made of a jig-welded reinforced steel construction to ensure perfect rigidity. It supports
the motor, the cutting table and the switch.
Cutting table (2)
Stainless steel top for an excellent resistance to corrosion with engraved measurements for precise
guide-a-cut alignment.
Electrical Motor and switch (3)
1kW motor. The ON-OFF switch also serves as emergency stop.