Norton TT 250 G, Operating Instructions Manual

Page: 9 / 20

9
Blade guard (4)
Jig-welded steel construction with 250mm-diameter blade capacity, which offers maximum operator
protection and increased visibility of the work piece. The guard is assembled on the frame.
Guide-a-cut (5)
The guide-a-cut can be adjusted to the desired cutting width. It is locked using two screws.
Water tank (6)
The blade is cooled by turning inside the water tank (7) located under the working table. The water
also minimises the dust generation and improves quality of cut. It can be taken out of the machine
by unscrewing the two nuts (7). An opening (8) in the frame allows the tank to be refilled easily.
Bevel cut
You can make bevel cuts with the machine by loosening the two screws (9) and pivoting the table.
2.4 Technical Data
Electric motor 1000W
Voltage
220V (machine code 70184625705 / 70184626965 for UK)
110V (machine code 70184627049)
Protection rating IP 54
Max. blade diameter 250 mm
Bore 25,4 mm
Rotation speed of the blade 2950 min
-1
Flange diameter 90 mm
Cutting depth mm 55 mm
Sound pressure level 71 dB (A) (ISO EN 11201)
Sound energy level 79 dB (A) (ISO EN 3744)
Table dimension (LxW) 560x500 mm
Machine dimensions (LxWxH) 620x600x355 mm
Weights
Machine cpl. 26 kg
Ready for use (with water) 28 kg