VERS. 01.09.2019
CFP16W _MAN_EN
8
Handle (1)
Jig welded steel construction is connected by 4 shockmount on the frame of the machine to reduce
the vibrations reach the operator
Belt drive and belt cover (2)
A centrifugal clutch inside the engine pulley drives the gear shaft through V-Belts. It allows to
gradually engaging the vibration of the machine. The drive assembly is enclosed in a metal guard.
Water tank (3)
Resistant plastic water tank
Thermal Engine (4)
The machine has a GX160 Honda engine with 4,8HP (3.6kw)
Lifting eye (5)
To lift the machine easily and safely, a lifting eye is located over the engine. This allows a balanced
lifting of the machine.
Eccentric element (6)
In the our compactors the system of eccentric elements has been optimized by moving the weight to
the right side of the axle, so that less weight counteracts the movement at start-up.
Less power is required to initiate the vibratory action, reducing energy consumption at start-up by
50% and thus using less fuel.
Plate (7)
The plates have rounded edges and raised to avoid marking the surface
Shock absorbers (8)
The engine supporting and the compacting plates are connected by 4 shockmount, which are
mounted to avoid that vibrations reach the operator.
