background image

VERS. 01.09.2019 

CFP16W _MAN_EN 

 
 
 
 

14 
 
 
 
 

7.3 Spare parts 

In order to consult the spare parts lists, we invite you to  visit the after-sales website of Norton 
Clipper by using the following address: 

https://spareparts.nortonabrasives.com

 

For a quick access, you can also use the QR Code shown below using your mobile phone: 
 
 
 
 
 
 
 
 
 
This electronic catalogue  provides exploded views and spare parts lists for different machines 
designed by Norton Clipper so you can find references you need. 
When ordering spare parts, please mention: 

  The serial number. 

  The code of the part. 

  The exact denomination. 

  The number of parts required. 

  The delivery address. 

  Please indicate clearly the means of transportation required such as "express" or "by air". 

Without specific instructions, we will forward the parts through the means which seem 
appropriate to us --- but which is not always the quickest way. 

 
Clear instructions will avoid problems and faulty deliveries. 
If not sure, please send us the defective part. In the case of a warranty claim, the part must always 
be returned for evaluation. Spare parts for the motor can be ordered with the manufacturer of the 
motor or with their dealer, which is often quicker and cheaper. 
This machine has been manufactured by       

Saint-Gobain Abrasives S.A.

 

190, Bd. J.F. Kennedy    

 

 

 

L- 4930 BASCHARAGE  

 

 

 

Grand-Duché de Luxembourg. 

                Tel.: 00352-50401-1     

                                                                  

http://www.construction.norton.eu

  

  e-mail

[email protected] 

 
 
 
 

 

Summary of Contents for Clipper CFP16W

















Reviews: