background image

VERS. 01.09.2019 

 CFP16W _MAN_EN 

 
 
 
 

 
 
 
 

 

1.2 Machine plate

 

Important data can be found on the following plate located on the machine: 
 

 

1.3 Safety instructions for particular operating phases 

 

Before starting the work 

 

  Before commencing work, make yourself familiar with the working environment at the place 

of use. The working environment includes: obstacles in the area of work and manoeuvre, the 
firmness of the floor, necessary protection at the site relating to public thoroughfares and the 
availability of help in the event of accidents.. 

  Plate compactors must only be used for compaction jobs observing safety and operating 

instructions. 

  People who work with plate compactors must know everything regarding safety instructions. 

  Do not take drugs or drink alcohol before using plate compactors. 

  Always wear appropriate protective clothes (ear protections, gloves, protecting shoes and 

helmet). 

  Do not alterate the operation devices of the plate compactor. 

  Do not leave control elements during compaction. 

  Store the compactor with engine off in a safe place. 

  Always refill fuel tank when the engine is off. Do not allow fuel to come into contact with the 

hot parts of compactor and engine. 

  Do not smoke when using compactor. Keep the compactor out of open flames. 

  Always check fuel tank cap. If there is a fuel cock, shut it off when the engine is not working. 

  Do not use the compactor in places where there are gaseous exhalations. 

  Do not use the machine indoors or in an enclosed area unless inadequate ventilation. 

  Always wear appropriate protective clothes. 

Machine model 

Machine code 

Machine Weight 

Year of production 

Serial number 

Summary of Contents for Clipper CFP16W

















Reviews: