VERS. 01.09.2019
CFP16W _MAN_EN
13
Reset the number of engine rpm
The transmission belt has loosened up
Tension the transmission belt and, if
necessary, replace it
The engine rpm are low but the exciter
does not stop
Centrifugal clutch malfunction
Repair the centrifugal clutch and, if
necessary, replace it
The exciter heats up to over 90° (bath oil
only)
There is too much of oil in the exciter
Top up the oil level. Check whether the oil
seal has been damaged; if necessary replace
it
The engine works with difficulty and the
exciter is too noisy and it stops or slows
down
Mechanical block of the exciter (bearings,
shaft)
Remove the element causing the failure or, if
necessary, replace the exciter
The engine turns off or does not work
properly
Fuel tank empty
Add fuel
Oil lack
Add oil
Dirty air filter
Clean air filter, if necessary replace it
Engine damaged
Contact an engine service center
