18
If you haven't installed a rudder system, the assembling is done. Please see the notes for
disassembling.
The next step is the installation of the rudder system. A few things have to be done here only
once. It is not necessary to redo them at further assembling.
7) Installation of the rudder system
You have already installed the two rails
(see installation steps above)
It remains:
2x pedals
2x rolled up bowden wire (1)
1x rudder blade (2)
1x pull-up cord (3)
2x holding clip for cockpit (4)
2x cable clamp (5)
2x loose ropes (no pic)
Take the rudder blade and insert it on the pickup on the stern. Therefore take off the secure
ring, slide the rudder into the pickup and re-secure it with the ring:
1)
2)
3)
4)
5)
