12
Now take cross rib #5 and install it.
Important:
Install the frames #5 and also
#3 so that the ridge bar can snap into the
fitting on the top of the cross rib. The fitting
points away from the cockpit.
Make sure that the side fittings of the cross
rib are properly positioned into the side
elements. In order to do this, you may
have to push it into the right position
towards cross rib.
Insert ridge bar into the cross rib.
Now take the seat with the inflating tubes
facing to the front of the cockpit.
Insert the two seat rods into the seat.
Note
: Your seat has inflatable "hip-fit-
pads" on the sides, which will provide more
contact with your boat.
(not shown on the pictures)
