NorthStar 957 Operator'S Manual Download | Manualshive

Page: 3 / 204

background image

Limited warranty policy

Northstar Technologies, Inc. warrants the Northstar 957 to be free from defects in mate-
rials and workmanship for a period of two (2) years. This warranty applies to the original
purchaser and to any subsequent owner during the warranty period, which begins on the
date of shipment of the 957, F.O.B. Acton, Massachusetts, to an authorized Northstar
dealer.

Systems may not be returned to Northstar without a Returned Materials Authorization
(RMA) number. Call your Northstar dealer or Northstar for instructions.

During the 957’s warranty period, Northstar will repair or replace, at its option, any part of
the 957 it finds to be defective due to faulty material(s) or workmanship. All such repairs
and/or replacements will be promptly performed by Northstar free-of-charge to the owner,
excluding freight costs incurred in shipping to the factory. Return shipments from North-
star to points within the United States are made via ground transportation, freight prepaid.
Special shipping charges (overnight, two-day, and so on) are the responsibility of the
owner.

To be covered by this warranty, the Northstar equipment must have been in normal use.
This warranty does not apply to 957’s with defects caused by improper installation, phys-
ical damage, abuse, tampering, lightning or other abnormal electrical discharge, or to
957’s with defaced or altered serial numbers, or to 957’s repaired by unauthorized persons
or repaired in a manner that violates Northstar’s recommended service procedures.

All repairs and/or replacements made under this warranty must be performed at North-
star’s facilities in Acton, Massachusetts. Performance of warranty work elsewhere will not
be authorized, and Northstar will not pay for any charges for such work. Northstar will not
be responsible for payment of any charges imposed by a Northstar dealer or other party
for services requested by and/or performed for a 957’s owner in connection with this
warranty. Such services might include removal of the 957 from a vessel, inspection, pack-
aging, handling, reinstallation, and the like.

Northstar Technologies assumes no responsibility for any consequential losses of any
nature with respect to any of its products or services sold, rendered, or delivered. The
foregoing is the only warranty expressed or implied. No other warranty exists.

«
1
2
3
4
5
...
»

Summary of Contents for 957













































































































































































































Reviews:

No comments

Related manuals for 957

echomap 40 series

Brand: Garmin Pages: 1

Brand: Globalsat Pages: 9

Brand: Apollo Pages: 74

Brand: Lowrance Pages: 1

Brand: Globalsat Pages: 37

eXplorist - Hiking GPS Receiver

Brand: Magellan Pages: 8

ZS-BT1 - Boombox With Bluetooth Technology

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 4

Brand: Sony Pages: 2

NVU84 - Widescreen Portable GPS Navigator

Brand: Sony Pages: 1

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 23

Brand: Sony Pages: 51

Brand: Sony Pages: 54

Brand: Sony Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands