Chapter 1 - Getting Started
957 Operator’s Manual, Rev. B
Page 15
the
KEYPAD
to enter the desired speed, then press the
ENTER
key to start going to the demo cursor location.
To go back to the
CHART
screen (but stay in demo mode),
press the
RETURN
key twice. The word
DEMO
always appears
on the
CHART
screen when you’re in demo mode.
To exit demo mode, on the
DEMO
CHART
screen, press the
EXIT DEMO
key. This immediately returns you to the
CHART
screen.
NOTE:
Video image display, chart rotation, and zooming in and out all work nor-
mally on the
DEMO CHART
screen.
Going to a quick waypoint now
You can point to any location on the
CHART
screen and go
right to it. This is called “point-and-shoot” navigation, which
can be the easiest and most powerful way to go to a waypoint:
Just select different locations and go to them, one at a time,
right on the chart. This way of navigating provides the most
flexibility in deciding where you want to travel. Simply move
the cursor wherever you want, press a key, and you’re
navigating.
1. Press the
CHART
function key to display the
CHART
screen.
2. Move the cursor to the desired chart location by pressing
the
CURSOR PAD
in the lower right corner of the 957.
3. Press the
GO TO CURSOR
menu key at the lower right of
the screen.
Summary of Contents for 957
