Page 94
957 Operator’s Manual, Rev. B
Chapter 7 - Understanding the Routes Function
Adding waypoints to the beginning of a route
To add waypoints to the beginning of a route:
1. Press the
CURSOR PAD
to move the cursor onto the first
waypoint in the route.
2. Press the
ADD TO FRONT
menu key, then move the cur-
sor to the existing waypoint or other location that you
want to add to the beginning of the route. As you move
the cursor, the 957 displays the new route leg as a dotted
line from that first waypoint to the cursor position.
3. If you’ve selected an existing waypoint, press the
ADD
WAYPT
menu key. If you’ve selected only a cursor posi-
tion, press the
ADD NEW WP
menu key (in this case, this
waypoint is stored with a name similar to (0001), with the
parentheses indicating the waypoint is part of a saved
route and the four-digit number uniquely identifying
each waypoint).
4. Repeat these steps for each new waypoint or cursor loca-
tion you want to add to the beginning of the route.
5. When done, to add waypoints to the middle or end of a
route, press the
CANCEL ADD
menu key. To go to
list-based editing, press the
RETURN
menu key. To go
back to the
CHART
screen, press the
CHART
key.
Summary of Contents for 957
