Page 16 of 28
Maintenance
Check that the plate compactor engine is turned off and cooled before attempting any maintenance,
cleaning, or inspection. Performing maintenance on an operating compactor can cause injury.
Maintain the compactor by adopting a program of conscientious repair and maintenance in accord-
ance with the following recommended procedures.
Also refer to the engine manufacturer’s instruction
manual for additional information about engine maintenance. The following chart is based on a normal
operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
Check the fuel level.
Check the engine oil level.
Inspect the fuel lines.
Inspect the air filter and replace it if needed.
Check and tighten the external hardware.
After the first 20 operating hours
Check and adjust the drive belt.
Change the engine oil.
After the first 50 operating hours or
every week
Check and adjust the drive belt.
Clean the air cleaner element.
Change the engine oil.
Check and clean the spark plug.
After the first 100 operating hours or
every month
Clean the fuel strainer.
After the first 300 operating hours or
every year
Check and adjust the valve clearance.
Clean the cylinder head.
Change the lubrication oil (SHELL OMALA #100 OR SAE
10W/30, 150CC)
