11
To expose concealed door hinge screws, first remove handle trim. Then slide trim over hinge
toward handle side. If your unit requires Door Panels, see "CUSTOM DOOR PANEL", section on
page 12.
All hinge sections attached to DOORS, adjust left or right. Top and Bottom Cabinet Hinges are also
adjustable in and out.
HINGE AND GASKET
ADJUSTMENT
It is possible that doors may become out of
adjustment in shipment. See diagram on right.
If product is installed slightly “out of level”,
doors may not line up properly. Check this
BEFORE adjusting hinges.
NOTE: Door gaskets occasionally compress
in shipment. If gasket does not seal all around,
warm slightly with a hair dryer and pull outward
softly until magnet in gasket seals against
cabinet.
MASTER SERIES UNITS
To expose concealed door hinge
screws, remove plug buttons if
present. All hinge sections attached
to Doors adjust left or right. Top and
Bottom Cabinet Hinges are also
adjustable in and out. See diagram
(shown without cabinet trim).
ADJ SCREW
EDGE OF
DOOR TRIM
DO
OR
CABINET