TVIPTZ30XIR
·
Quick Start Guide
3
DIP Switch SW2-Baudrate Settings
Baudrate
1
2
2400
ON
OFF
4800
OFF
ON
9600
ON
ON
Protocol Settings
For convenient settings, refer to the following list to set the protocol for the speed dome.
Table 1-3
Set the Protocol of the Dome
DIP Switch SW2-Protocol Settings
Protocol
3
4
5
Manchester Code
ON
ON
ON
Self-adaptive
OFF
OFF
OFF
Communication Mode Settings
The No. 7 of SW2 switch is for setting the RS485 communication mode of the dome to simplex or
half-duplex.
Table 1-4
Set Communication Mode of the Dome
DIP Switch SW2-Simplex/Half-duplex Settings
Description
6
Simplex
OFF
Half-duplex
ON
TVI Protocol Settings
The number 8 of SW1-switches is for setting the TVI protocol of the speed dome. You can refer to
Error! Reference source not found.
for details of setting the speed dome TVI protocol.
Table 1-5
Set TVI Protocol
Switch No.
Description
7
V2.0
OFF
V1.0
ON
Terminal Resistor Settings
The No. 8 of SW2 switch is used for turning on/off the 120Ω terminal resistor.
Summary of Contents for TVIPTZ30XIR
Page 1: ......
