TVIPTZ30XIR
·
Quick Start Guide
6
Baudrate:2400
Terminal Resistor: OFF
Please refer to the
Section 1.2 Settings
for DIP switch settings.
1.3.4
Installing the Speed Dome
The sketches of installing the speed dome are for reference only.
Steps:
1.
Hang the safety rope to the speed dome and then hook to the mount as shown in Figure
1-7(left).
2.
Route the cables of the speed dome through the wall mount.
3.
Connect the corresponding video/power/RS-485 cables.
4.
Install the speed dome to the mount, and secure the speed dome by rotating the speed dome
clockwise.
5.
Fasten the two lock screws with the Allen wrench, as shown in Figure 1-7(right).
③
②
①
Figure 1-7
Install the Speed Dome
Summary of Contents for TVIPTZ30XIR
Page 1: ......
