![background image](http://html.mh-extra.com/html/northern/ptzkbd3/ptzkbd3_user-manual_1708228005.webp)
4
████
Rear Panel (Figure 2)
Figure 2
1.
Power Switch: ON/OFF.
2.
Power input connector: input DC12V power.
3.
Communication connector RS485.
4.
Communication connector RJ45.
5.
Communication connector for DVR.
6.
Mode
:
Used to set the protocol in use and the baud rate of communications.
7.
Communication connector RS232.
████
Setting of the Keyboard
The protocol in use and the baud rate of communication of the keyboard are set by the MODE in
Figure 2. DIP1-DIP3 are used to select type of the communication protocol and the baud rate ,
shown as following table
◆
Some of the ID-Code of the protocols are set as follows:
Summary of Contents for PTZKBD3
Page 12: ...11 ...