Northern PTZKBD3, User Manual

Page: 7 / 13

6
████
Operation of the Keyboard
1. Select Address of the Speed Dome Camera
：
[CAM]+[N]+[Enter]
Display: Current Cam ID: 001
Description
：
N –– No. of camera from 0 to 255
Function: Select the address of the camera to be controlled. When the value N is in conformity with the
address of the Speed Dome Camera, it will be under control.
2. Set the Preset Position
：
[[N]+[ Enter]
Display: Preset No: 001
Description: N –– No. of preset position from 1 to 128.
Function: Store current position and refer to it as No. N position.
3. Call the Preset Position
：
[CALL]+[N]+[ Enter]
Display: Call Number: 001
Description: N –– No. of preset position from 1 to 128.
Function: Transfer the camera to the position of No. N preset position.
4. Cancel the Preset Position: [[N]+[OFF]
Display: Preset No: 001
Description: N –– No. of preset position from 1 to 128.
Function: Delete the No. N preset position stored.
5. Set the Cruise Track: (COP-2, PELCO-D, PELCO-P Available)
◆
Enter the Status of Track Setting
：
[SHOT]+[N]+ [ON] (N
：
No. of track from 1 to 6).
Display: Track = 01 Sum = 06
Description: Track No.1 is currently setting, in which there are 6 preset points.
◆
Edit Track: Press [TELE] to edit down page and press [WIDE] to edit up page. Each track involves 16 preset
points and the running speed and the dwelling time of each preset position.
Display: No: 01 Point: 001
→
Description: The 1st preset position in the track is 001.
Display: No: 01 Speed: 001
→
Description: The speed of the 1st preset point in the track is the 1st class.
Display: No: 01 Time: 004
→
Description
：
The dwelling time of the 1st preset point in the track is 4
Seconds
◆
Speed Range: 1 to 8 from the fastest to the lowest. Any speed outside the range will be referred as the 1st
class; the range of the dwelling time is: 1 to 255.
◆
When the No. N preset point is set as No. 0, then all preset points before the No. N preset point in the track