Operating Instructions and Parts Manual
Northern Industrial Welding
15
Amp Arc 7000
Amp Arc 7000
Other Safety and Standards Information
This manual is designed to inform the operator of safety and general use of this
model only. For further information about welding safety refer to the following
standards and comply with them where applicable.
• ANSI Standard Z49.1
— SAFETY IN
WELDING AND CUTTING obtainable
from: American Welding Society 550 NW
Le Jeune Road, Miami, FL 33126
Tel. (800) 443-9353
Fax (305) 443-7559
www.amweld.org or www.aws.org
• ANSI Standard Z87.1
— SAFE PRACTICE
FOR OCCUPATION AND EDUCATIONAL
EYE AND FACE PROTECTION
Obtainable from: American National
Standards Institute (ANSI) 11 West 42nd
St. New York, NY 10036
Tel. (212) 642-4900
Fax (212) 398-0023 www.ansi.org
• NFPA Standard 51B
— CUTTING AND
WELDING PROCESS obtainable from:
National Fire Protection Association,
1 Batterymarch Park, P.O. Box 9101
Quincy, MA 02269-9101
Tel. (617) 770-3000
Fax (617) 770-0700 www.nfpa.org
• OSHA Standard 29 CFR
, Part 1910,
Subpart Q. —WELDING, CUTTING AND
BRAZING obtainable from your state
OSHA office or from: U. S. Dept. of Labor
OSHA, Office of Public Affairs Room
N3647, 200 Constitution Ave. NW
Washington, DC 20210 www.osha.gov
• CSA Standard W117.2
— Code for
SAFETY IN WELDING AND CUTTING
Obtainable from: Canadian Standards
Association, 178 Rexdale Blvd.,
Etobicoke, Ontario M9W 1R3
www.csa.ca
