IDENTIFY COMPONENTS.
Packed
separately
the carton you find
all supplied items which are to be
attached to the telephone set housing
throughout these Instructions. Remove
HANDSET
HANDSET CORD
LINE CORD
4
eadh
from its
packaging
before beginning the
procedures (The wall-mount shown
below an optional item available from
your telephone supplier).
Bracket Assembly
The optional
Wall-Mount Kit
(A0342537) Includes a
shaped
for attachment to the
base of the set. Complete installation
instructions
accompany
the
HANDSET INSTALLATION --
STEP 1
right side of telephone set as shown in
Fig. A.
Ensure plug Is properly seated audible
click) and installed in the
jack.
STEP 2
Grasp the handset and the opposite end
of the handset cord as shown in
Fig.
Fully insert the plastic plug at the end of
cord into the jack located at end of
handset. (An audible click
the
plug is properly seated In
WARNING: Do not
insert the plug at the
free end of the handset cord
into
a wall or baseboard jack. Such misuse
may result In unsafe sound levels
DESK-TOP APPLICATION
STEP
1
Complete HANDSET INSTALLATION
(Fig. A and B).
STEP 2
Place the telephone set as shown In Fig. C
and carefully slide the plug at either end
of the line cord into the lack
the back of set. (An audible
the
is properly seated in the jack).
STEP 3
Fig. C
Properly installed handset and cords
for a desk-top installation are shown in
Fig.
STEP 4
Place fully assembled telephone (base
down) in location required and insert plug
located at opposite end of line cord into
or wall jack receptacle as
shown in Fig. E.
Place handset on hook. Check for dial
tone by lifting handset off-hook and
listening.
Summary of Contents for Unity I
Page 1: ......
